PENGGUNAAN TRASS UNTUK SUBSTITUSI AGREGAT HALUS DALAM PEMBUATAN MORTAR GEOPOLIMER


Sandri Linna Sengkey, Rita Irmawaty, Muralia Hustim, Purwanto Purwanto

Abstract


Ketersediaan trass di Indonesia cukup banyak sehingga perlu dimanfaatkan dalam pembuatan beton maupun mortar. Selain itu kandungan unsur silica yang cukup tinggi dari trass diharapkan dapat memberi pengaruh dalam pembuatan material geopolimer. Dalam studi ini, pengaruh penggunaan trass sebagai bahan substitusi agregat halus dalam pembuatan mortar geopolimer berbahan fly ash terhadap workabilitas dan kuat tekan akan didiskusikan. Substitusi trass dibuat dengan variasi 0%, 10%, 20% dan 30% terhadap berat pasir. Campuran mortar geopolimer dibuat dengan komposisi Fly ash/pasir sebesar 0.5, NaOH 10 M, rasio Na2SiO3/NaOH sebesar 2.5 dan rasio alkali activator/fly ash sebesar 0.5 dengan metode curing dalam ruangan. Hasil studi menunjukan semakin besar substitusi trass, nilai workabilitas menurun sedangkan kuat tekan semakin meningkat. Substitusi trass terhadap pasir sebesar 20% memberikan hasil kuat tekan yang optimal.


Kata kunci: Fly ash; Kuat Tekan; Mortar Geopolimer; Trass; Workabilitas


Full Text:

PDF

References


J. Davidovits, “Global warming impact on the cement and aggregates industries”, World Resources, Rev. 6(2) 263-78, 1994.

G. F. Huseien, J. Mirza, M. Ismail, S. K. Ghoshal, A. A. Hussein, “Geopolymer Mortars As Sustainable Repair Material : A Comprehensive Review”, Renewable and Sustainable Energy, Rev., 80, 54-74, 2017.

D. W Law., A. A. Adam, T. K. Molyneaux, I. Patnaikuni, A. Wardhono, ”Long term durability properties of class F fly ash geopolymer concrete”, Materials and Structures, 48:721-731, 2015.

T. Baszczyski dan Krol, ”Durability of cement and geopolymer composites”, IOP Conference series:Materials science and Engineering, 251 012005, 2017.

P. Chindaprasirt, U. Rattanasak, ”Fire-resistant geopolymer brick synthesized from high-calcium fly ash with outdoor heat exposure”, Journal Clean Technologies and Environmental Policy, 2018.

F. Colangelo, R. Cioffi, G. Roviello, I. Capasso, D. Caputo, P. Aprea, B. Liguori, C. Ferone, ”Thermal Cycling stability of fly ash based geopolymer mortars”, Composites Part B: Engineering, Volume 129, 11-17, November 2017.

A. Allahverdi, K. Mehrpour, E.N Kani, ”Investigating the possibility of utilizing pumice-type natural pozzolan in production of geopolymer cement”, Ceramics-Silikaty, 52 (1) 16-23, 2008.

M. Najimi and N. Ghafoori, ”Engineering properties of natural pozzolan/slag based alkali activated”, Concrete Construction & building Materials, 208 46-62, 2019.

F. N. Degirmenci, ”Utilization of natural and waste pozzolans as an alternative resource of geopolymer mortar”, International Journal of Civil Engineering, 1-10, 2016.

J. E. Waani dan E. Lintong, ”Substitusi material pozolan terhadap semen pada kinerja campuran semen,” Jurnal Teknik Sipil, Vol.24, No.3:237-245, 2017.

D. Nindita, Pengujian sifat fisika dan sifat kimia pada trass sebagai bahan aditif semen, FMIPA UI, 2008.

J. J. Ekaputri dan Triwulan, ”Sodium sebagai activator fly ash, trass dan lumpur sidoarjo dalam beton geopolimer”, Jurnal Teknik Sipil, 20(1) 1-9, 2013.

P. Risdanareni, J. J. Ekaputri, Triwulan, ”The Influence of alkali activator concentration to mechanical properties of geopolymer concrete with trass as a filler,” Materials Science Forum, 803 125-34, 2015.

ASTM C 618-08, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, ASTM International, 2008.

Antoni, S. W. Wijaya, D. Hardjito, ”Factors affecting the setting time of fly ash-based geopolymer”, trans tech public. msf.841.90, 2016.

U. Rattanasak dan P. Chindaprasirt, ”Influence of NaOH solution on the synthesis of fly ash geopolymer”, Minerals Engineering, 22(12) 1073-8, 2009.

ASTM C1437, Standard test method for flow of hydraulic cement mortar, ASTM Internasional, 2007.

ASTM C109/C109 Test method for compressive strength of hydraulic cement mortars (using 2 in. or [50mm]cube specimens)

K. Ghosh dan P. Ghosh, “Effect of Na2O/Al2O3, SiO2/Al2O3 and W/B ratio on setting time and workability of fly ash based geopolymer”, International Journal of Engineering Research and Applications, ISSN 2(4) 2142-2147, 2012.

A. Ilham, ”Pengaruh sifat-sifat fisik dan kimia bahan pozolan pada beton kinerja tinggi”, Media Komunikasi Teknik Sipil 13(3) 75-85, 2005.

S. E. Wallah, ”Pengaruh perawatan dan umur terhadap kuat

tekan beton geopolimer berbasis abu terbang”, Jurnal Ilmiah Media Engineering, Vol. 4 No. 1, 1-7, ISSN:2087-9334, Maret 2014.


Refbacks

  • There are currently no refbacks.